Can you believe it? Tape Project is ten years old! Thanks to everyone who has supported us in introducing studio quality tape reproduction to the audiophile community!

Author Topic: Reel screws and barrel nuts  (Read 2724 times)

Offline Brian C.

  • Full Member
  • ***
  • Posts: 52
    • View Profile
Reel screws and barrel nuts
« on: December 31, 2009, 06:32:45 AM »
I have a friend who has 200 flanges and 100 hubs but no screws and nuts to assemble them. Anyone know an off-the-shelf source?
Thanks.

Brian.
Brian Clark, One Inch Studio, London, UK.

Offline steveidosound

  • Sr. Member
  • ****
  • Posts: 484
    • View Profile
Re: Reel screws and barrel nuts
« Reply #1 on: December 31, 2009, 09:26:33 AM »
I have a friend who has 200 flanges and 100 hubs but no screws and nuts to assemble them. Anyone know an off-the-shelf source?
Thanks.

Brian.

This might be what you are looking for...

http://usrecordingmedia-store.stores.yahoo.net/hasetfor1mer.html
Steve Williams

you don't want to know what equipment I listen to...

Offline High and Outside

  • Administrator
  • Sr. Member
  • *****
  • Posts: 354
    • View Profile
Re: Reel screws and barrel nuts
« Reply #2 on: December 31, 2009, 09:46:27 AM »
Yep, that's where we get 'em. We don't buy sets of 12, we buy in bulk, so your friend might want to inquire about that. If he needs 100 it should be cheaper than 12-packs.
Paul Stubblebine
Managing Director, The TapeProject

Offline Brian C.

  • Full Member
  • ***
  • Posts: 52
    • View Profile
Re: Reel screws and barrel nuts
« Reply #3 on: December 31, 2009, 11:36:07 AM »
Thanks Steve and Paul, I'll pass that link on to him.

Brian.
Brian Clark, One Inch Studio, London, UK.