Can you believe it? Tape Project is ten years old! Thanks to everyone who has supported us in introducing studio quality tape reproduction to the audiophile community!

Author Topic: Aligment of a REVOX C270  (Read 2433 times)

Offline eugen_syd

  • Full Member
  • ***
  • Posts: 34
    • View Profile
Aligment of a REVOX C270
« on: June 02, 2010, 02:23:24 AM »
Hi Everybody,

I rebuild a REVOX C270 reel to reel and I need to do the electrical alignment procedure. REVOX service manual call for an extension card for that. Anybody has one I can borrow or purchase?
Also anyone has experience with this procedure? Anything I need to know beside what is written in the revox service manual? I am setting the machine up for 3-3/4" and 7-1/2ips NAB equalization.
Any advice is much appreciated.

Best regards from down under

Eugen

Offline eugen_syd

  • Full Member
  • ***
  • Posts: 34
    • View Profile
Re: Aligment of a REVOX C270
« Reply #1 on: June 14, 2010, 09:06:39 PM »
I finally completed the alignmet. The sound you get out of an REVOX C270 is beyond any expectations. Never had anything better than a well aligned REVOX B77. The alignment a little tricky, might be easier if you speak German but got it done somehow. All efforts well worthed!

Eugen