Check out the new Tape Project website at tapeproject.com, now with online ordering. Inventory is updated every week, so stop by often to see what we have in stock.

Author Topic: Aligment of a REVOX C270  (Read 4347 times)

Offline eugen_syd

  • Full Member
  • ***
  • Posts: 34
    • View Profile
Aligment of a REVOX C270
« on: June 02, 2010, 02:23:24 AM »
Hi Everybody,

I rebuild a REVOX C270 reel to reel and I need to do the electrical alignment procedure. REVOX service manual call for an extension card for that. Anybody has one I can borrow or purchase?
Also anyone has experience with this procedure? Anything I need to know beside what is written in the revox service manual? I am setting the machine up for 3-3/4" and 7-1/2ips NAB equalization.
Any advice is much appreciated.

Best regards from down under

Eugen

Offline eugen_syd

  • Full Member
  • ***
  • Posts: 34
    • View Profile
Re: Aligment of a REVOX C270
« Reply #1 on: June 14, 2010, 09:06:39 PM »
I finally completed the alignmet. The sound you get out of an REVOX C270 is beyond any expectations. Never had anything better than a well aligned REVOX B77. The alignment a little tricky, might be easier if you speak German but got it done somehow. All efforts well worthed!

Eugen