Check out the new Tape Project website at tapeproject.com, now with online ordering. Inventory is updated every week, so stop by often to see what we have in stock.

Author Topic: Alignment with software...  (Read 2992 times)

Offline lilak5

  • Newbie
  • *
  • Posts: 4
    • View Profile
Alignment with software...
« on: October 21, 2011, 09:25:58 AM »
Hello Alignment-Specialists.

I am trying to learn how to align my tape machines, in this case a Studer A807.
The use of the software "audioTester" seems to make sense.

Please see attached graphics.

I would like to know, if this is the right way and if my results are acceptable (maybe a hint, what could I do better).

The software gives a sweep from 20 Hz - 20000 Hz on the output and draws a graph for the input.
I adjusted with a millivoltmeter and a scope. Then I used the software and "cleaned" the curve as goog as possible.
Here is the result plus a second graph showing only the hardware without the tape machine (Cables XLR-In directly to XLR-OUT)

Thanks a lot!



/peter
 
Peter Avermann,
TTP Fan from Germany...