TP-027, Jerry Garcia / David Grisman wins a Writer's Choice Award from Myles Astor of Positive Feedback Online

Author Topic: Otari MTR-10 schematics, where to get them?  (Read 22388 times)

Offline mdainsd

  • Jr. Member
  • **
  • Posts: 7
    • View Profile
Otari MTR-10 schematics, where to get them?
« on: November 12, 2011, 02:56:26 PM »
Hello forum! I have searched and searched through the forum before posting this, but can any one point me in the direction of schematics for this machine? I have the service manual for it but in somebody's infinite wisdom it does not contain schematics.

My faithful machine has lost all illumination to buttons switches and VU meters. Also the tape lift is no longer working. Otherwise everything is hunky-dorry.

Thanks in advance:
mark allen

Tascam ATR 80 24 track > Mackie 32.8.2 console > Otari MTR-10 (backup: Otari MX5050 MkI)

Offline cvandyke

  • Jr. Member
  • **
  • Posts: 10
    • View Profile
Re: Otari MTR-10 schematics, where to get them?
« Reply #1 on: November 14, 2011, 03:36:05 PM »
I don't know of an online source for schematics.

I do have an MTR-10 manual with schematics and could scan the ones you need assuming I have them - I'm not sure if my schematics are complete or not. I'll make an attempt to look tonight when I'm at home and see how many pages the two areas you need cover. Some of the schematics are fold outs that cover multiple pages so that could be a complication - my scanner is limited to 8.5 X 11 inches. Scanning all of the schematics would be a project that is too big for me to take on right now.

I've had to deal with many burned out bulbs in my machine so, unless they all went at the same time, it might just be the bulbs are all open. Did you test the bulbs yet?

--Chris Van Dyke
____
Chris Van Dyke

Offline ironbut

  • Global Moderator
  • leader in spreading disinformation
  • *****
  • Posts: 2503
  • rs1500>repro amp#1
    • View Profile
Re: Otari MTR-10 schematics, where to get them?
« Reply #2 on: November 14, 2011, 07:33:41 PM »
Hey Chris,

I'd like to get a scan of those schematics too.
I've decided to try and collect as many manuals/schematics for tape machines and post them in one place (I've got a lot of them already).

If anyone has both for the MTR15/20 I'd love to get those too.
steve koto
 Sony scd 777es(R. Kern mods)> Vpi Aires>Dynavector XX-2mkll>Bent mu>CAT ultimate>CJ premeir 140>Magnepan 1.6qr(Jensen xover)Headphone Eddie Current Zana Deux>AT ad2000,HD800 ,Metric Halo ULN-2 (battery powered),
 HE Audio Jades

Offline mdainsd

  • Jr. Member
  • **
  • Posts: 7
    • View Profile
Re: Otari MTR-10 schematics, where to get them?
« Reply #3 on: November 14, 2011, 10:51:18 PM »
I don't know of an online source for schematics.

I do have an MTR-10 manual with schematics and could scan the ones you need assuming I have them - I'm not sure if my schematics are complete or not. I'll make an attempt to look tonight when I'm at home and see how many pages the two areas you need cover. Some of the schematics are fold outs that cover multiple pages so that could be a complication - my scanner is limited to 8.5 X 11 inches. Scanning all of the schematics would be a project that is too big for me to take on right now.

I've had to deal with many burned out bulbs in my machine so, unless they all went at the same time, it might just be the bulbs are all open. Did you test the bulbs yet?

--Chris Van Dyke

Hi Chris, yes I checked the bulbs first, they are fine. I doubt the LEDs for tape speed etc all simultaneously failed. Your offer of any help is much appreciated! When you have a chance, definitely the lift circuit, then the lamp (transport mainly) and LED circuits would get me moving in the right direction. I just cant understand why they arent in the service manual. My 24 track machine has every assembly drawing and schematic you can imagine, but its not an Otari either...
mark allen

Tascam ATR 80 24 track > Mackie 32.8.2 console > Otari MTR-10 (backup: Otari MX5050 MkI)

Offline cvandyke

  • Jr. Member
  • **
  • Posts: 10
    • View Profile
Re: Otari MTR-10 schematics, where to get them?
« Reply #4 on: November 15, 2011, 09:51:17 AM »
I do have the schematics but had trouble with my scanner so I'll need to deal with that first. Since there is some interest in copies of these, I'll make scanning the schematics a bad weather project. I certainly support making these available.

My manual covers the MTR-10II and MTR-12II and there are separate schematics for the 4 and 2 track models where they vary (eg the meter bridge). The schematics are printed on thin paper and some of them have torn loose from the binder so, as I said before, I'm not sure I have the complete set. I've seen other manuals where all the schematics were missing. I suspect that an engineer may have purposely removed them from the manual to keep them safely on file or perhaps to keep them away from someone in the studio who damaged other equipment.

Mark - if you lost the lights to your VU meters at the same time as the LEDs, I wonder if your 7.5 VDC supply is out (maybe it's 7 VDC, I'm at work and the schematics are at home). I had to replace those bulbs and as I recall they are connected between 7 VDC and ground without any switches or other circuitry in between. I'll scan the relevant schematics for you a soon as I can.
____
Chris Van Dyke

Offline mdainsd

  • Jr. Member
  • **
  • Posts: 7
    • View Profile
Re: Otari MTR-10 schematics, where to get them?
« Reply #5 on: November 15, 2011, 06:12:22 PM »
The status indicators for the supplies all indicate good. Ive found the fuses on a board in the back of the supply and they all check good. I think you are probably on the right track with your thoughts. A schematic (or two) and a few minutes with the meter should run it down. I look forward to your scans when you can get to them. I really like my -10 but recently a Sony APR-5003 has caught my eye LOL. Then I could relegate the -10 to backup duty and off the 5050 I have. Fun hobby huh?
mark allen

Tascam ATR 80 24 track > Mackie 32.8.2 console > Otari MTR-10 (backup: Otari MX5050 MkI)

Offline High and Outside

  • Administrator
  • Sr. Member
  • *****
  • Posts: 363
    • View Profile
Re: Otari MTR-10 schematics, where to get them?
« Reply #6 on: November 15, 2011, 10:28:32 PM »
I'll make scanning the schematics a bad weather project. I certainly support making these available.

My manual covers the MTR-10II and MTR-12II ...

Chris,

I am also in favor of making these (and other) schematics available. I've had trouble finding schemos for my MTR-20 as well.

If you'd be willing to send me your manual I'd be willing to have the whole thing professionally scanned at my expense, including the foldouts, and then send your manual back. If you wish to take me up on this, please email me: paul at tapeproject dot com.

Paul Stubblebine
Managing Director, The TapeProject

Offline cvandyke

  • Jr. Member
  • **
  • Posts: 10
    • View Profile
Re: Otari MTR-10 schematics, where to get them?
« Reply #7 on: November 16, 2011, 09:17:09 AM »
I've got the first two scans done and both are overviews which contain large blocks that refer to another schematic page for a component level schematic of that block. I've put the schematics at http://home.earthlink.net/~kawcvd/mtr-10_12_schematics/ and I'll maintain this for the foreseeable future. Some parts of the scans are a bit hard to read but they are that way in the original.

The two scans are:

 "Audio control assembly" (http://home.earthlink.net/~kawcvd/mtr-10_12_schematics/audio-control-assy-cb2810a.gif)

 "Tape transport Assembly" (http://home.earthlink.net/~kawcvd/mtr-10_12_schematics/tape-transport-assy-t00250c.gif).

If anyone has an urgent need for a specific schematic, please let me know. The best way to refer to a specific schematic is by part name and number if it's known. On the schematics above, component level schematics are referenced in this manner in the largest type size.

Mark-
I was wrong about the VU lights in that they are powered by 7 VAC (not DC).

Looking over the schematics, I believe the tape lifter solenoid is labeled "shifter sol." on the "tape transport" schematic and is connected to "mother PCB assy" so I'll scan that one next. I'll also put the "power supply hookup pcb assay" and "power supply PCB assy" at the top of the list.
____
Chris Van Dyke

Offline ironbut

  • Global Moderator
  • leader in spreading disinformation
  • *****
  • Posts: 2503
  • rs1500>repro amp#1
    • View Profile
Re: Otari MTR-10 schematics, where to get them?
« Reply #8 on: November 16, 2011, 12:44:53 PM »
Thanks Chris,
Just so you know, I copied the two pages to pdf's and I'm able to zoom in till some of the components are the size of a matchbook and it still looks pretty good.
Nice scan!
steve koto
 Sony scd 777es(R. Kern mods)> Vpi Aires>Dynavector XX-2mkll>Bent mu>CAT ultimate>CJ premeir 140>Magnepan 1.6qr(Jensen xover)Headphone Eddie Current Zana Deux>AT ad2000,HD800 ,Metric Halo ULN-2 (battery powered),
 HE Audio Jades

Offline mdainsd

  • Jr. Member
  • **
  • Posts: 7
    • View Profile
Re: Otari MTR-10 schematics, where to get them?
« Reply #9 on: November 16, 2011, 07:23:14 PM »
Thanks so much Chris. What you have posted should give me a good start. Im thinking Saturday morning and a nice cup of coffee!
mark allen

Tascam ATR 80 24 track > Mackie 32.8.2 console > Otari MTR-10 (backup: Otari MX5050 MkI)

Offline mdainsd

  • Jr. Member
  • **
  • Posts: 7
    • View Profile
Re: Otari MTR-10 schematics, where to get them?
« Reply #10 on: November 27, 2011, 12:56:55 PM »
Well.... voltage present to supply the lifter solenoid, but no pull down happening to make it operate.

If possible, I guess the next scans I could really use are the mother board and the Transport control card?

Thanks in advance.
mark allen

Tascam ATR 80 24 track > Mackie 32.8.2 console > Otari MTR-10 (backup: Otari MX5050 MkI)

Offline cvandyke

  • Jr. Member
  • **
  • Posts: 10
    • View Profile
____
Chris Van Dyke

Offline mdainsd

  • Jr. Member
  • **
  • Posts: 7
    • View Profile
Re: Otari MTR-10 schematics, where to get them?
« Reply #12 on: December 03, 2011, 07:46:05 PM »
Thanks!


*edit. Well narrowed it down to the transport control board. Uggg, now I get to hunt for one of those elusive extender boards.
« Last Edit: December 04, 2011, 11:38:46 AM by mdainsd »
mark allen

Tascam ATR 80 24 track > Mackie 32.8.2 console > Otari MTR-10 (backup: Otari MX5050 MkI)

Offline marklang

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Otari MTR-10 schematics, where to get them?
« Reply #13 on: April 03, 2012, 07:15:48 PM »
Did you ever get all the Otari MTR 10 schematics you wanted.    I have a set, a little more than 12 MB pdf file.  Too big to attach here, but I can email if needed.

Offline Gkar

  • Full Member
  • ***
  • Posts: 105
  • Randy Warren
    • View Profile
Re: Otari MTR-10 schematics, where to get them?
« Reply #14 on: April 06, 2012, 11:45:15 AM »
I have a pretty tight copy of the MTR-10 schematics, 58 meg though...  I also have a nice copy of the user manual with a lot of info for checking and testing various systems.  AFA the lamps, I had to replace all the lamps in my MTR-10 and MX5050, I think I bought them from digi-key, I believe, think I sent Steve the order numbers on that particular part
"Music possesses far richer means of expression, and it is a more subtle medium in which to translate the thousand shifting moments in the mood of a soul." - Tchaikovsky