Can you believe it? Tape Project is ten years old! Thanks to everyone who has supported us in introducing studio quality tape reproduction to the audiophile community!

Author Topic: Technics 1500 Meter lights and Direct out  (Read 1718 times)

Offline porcupunctis

  • Newbie
  • *
  • Posts: 1
    • View Profile
Technics 1500 Meter lights and Direct out
« on: March 17, 2015, 09:46:29 AM »
Hello, new to the Tape Project but but been around the BH forum for some time.

I'm applying the tape path update to a 1500 and need to replace a meter lamp and establish some direct outs while I have the machine on the bench.

I was considering a set up where the 4T position on the switch would be my direct outs and the 2T would utilize the existing built-in repro.  Is this a good approach?  What is the easiest way to apply this mod?

Also, what is the easiest way to get to the meters?

Thanks in advance for any help.

Offline Listens2tubes

  • Sr. Member
  • ****
  • Posts: 284
  • Reel Analog
    • View Profile
    • Listens2tubes
Re: Technics 1500 Meter lights and Direct out
« Reply #1 on: March 26, 2015, 10:48:04 AM »
Why not wire from the headblock so both & track heads use your external tape head amp? Also the Tape Project tapes are track.
Neal - Ampex Fineline F-44, 3 - Otari MX5050BII-2, Revox A77 Mk II , Teac A 4010s, 4070, Sony TC102A, Magnecord 1020, Systemdek IIX/Dynavector Karat 17D2MKII, CEC CD3300 CDP, K Works NanoMax DAC, Van Alsine Transcendence Eight+ tube preamp, Dynaco MkIV amp pair, Paradigm Reference Studio 100 v1