TP-028, Nat Adderley's Work Song is now available

Author Topic: Studer A810 Strange Transport Problem  (Read 1573 times)

Offline steve00021

  • Jr. Member
  • **
  • Posts: 9
    • View Profile
Studer A810 Strange Transport Problem
« on: April 02, 2015, 02:58:49 AM »
Hi All

I have a very strange transport problem..
when the leader section of the tape is passing the heads, the MPU board will do a reset & display software version 46/90 just like you have powered it up...
when the tape its self is in contact with the head it will play fine...
I have tried different types of leader tape & they all do the same thing..???


Offline Waltzingbear

  • Jr. Member
  • **
  • Posts: 24
    • View Profile
Re: Studer A810 Strange Transport Problem
« Reply #1 on: May 13, 2015, 09:47:37 AM »
more than likely you are having a problem with a floating/ungrounded reel motor assembly. The tape provides a conductive path to the chassis with tape, and when non-conductive leader tape goes past, it can cause a charge buildup like a vandergrafe generator if the elements in the path do not provide a bleeder path.

This is not a good idea. making sure the reel is contacting the spindle and shaft is a starting point. But you need to go thru and clean all the contact points of the reel motor assembly.

But regardless, it should not be happening at play speeds anyway. Something is generating a glitch that is getting into the data path and causing the reset.