Check out the new Tape Project website at tapeproject.com, now with online ordering. Inventory is updated every week, so stop by often to see what we have in stock.

Author Topic: Upgrading Studer A807 15ips to 30ips  (Read 5315 times)

Offline dmnieto

  • Newbie
  • *
  • Posts: 3
    • View Profile
Upgrading Studer A807 15ips to 30ips
« on: August 31, 2015, 06:03:18 PM »
Hi,

I have a studer A807 MK1 standard, and I was wondering if it is safe to upgrade it to 30ips.

From what I see, in order to set up the Studer A807 to 30ips it is necessary to:
1) Change the jumper in the control panel to HS mode
2) Modify jumpers W5/W6 in the audio control board to set the correct EQ parameters for High Speed.

Everything else in the machine seems to work with 30ips.

My question is, do I need a different capstan to support 30 ips? I currently have the 1.021.605.81, and nowhere in the documentation or in the parts list there is a mention that a special capstan is needed for the A807 to work with 30ips, but that is, for example, the case of the A810. That machine lists two different capstans (2 pole 15ips, 4 pole 30ips).

Anybody has done the experiment?


Offline Ki Choi

  • Sr. Member
  • ****
  • Posts: 314
    • View Profile
Re: Upgrading Studer A807 15ips to 30ips
« Reply #1 on: April 04, 2016, 01:20:49 PM »
Actually, you would need a 2 pole motor to reach 30ips.  2 pole capstan motor will cover 7.5, 15 and 30 ips whereas 4 pole motor will cover 3.75, 7.5, and 15 ips.

Ki
Ki Choi