TP-027, Jerry Garcia / David Grisman wins a Writer's Choice Award from Myles Astor of Positive Feedback Online

Author Topic: Otari mx5050 newbie  (Read 1334 times)

Offline Lgionet

  • Newbie
  • *
  • Posts: 1
    • View Profile
Otari mx5050 newbie
« on: January 24, 2016, 02:12:35 PM »
Hello, I am going to buy a Otari B2 probably on eBay. Question - for playing tape project or prerecorded tapes how do I connect tape player to my tube amp. My tube amp has only two input options. Rca jacks for line in with or without the Preamp. Is it as simple as connecting output from R2R directly to amp bypassing the preamp? I am sure there might be complications, pls help. Thanks

Offline Listens2tubes

  • Sr. Member
  • ****
  • Posts: 284
  • Reel Analog
    • View Profile
    • Listens2tubes
Re: Otari mx5050 newbie
« Reply #1 on: January 24, 2016, 06:34:53 PM »
Go to http://www.theanalogdept.com/manuals.htm to download a manual for your deck. In section 2.5.2 Signal Connections you will find wiring diagrams. Use the appropriate Unbalanced configuration. Mine use the Unbalanced 2 Conductor setup , which works well.
« Last Edit: January 24, 2016, 06:43:52 PM by Listens2tubes »
Neal - Ampex Fineline F-44, 3 - Otari MX5050BII-2, Revox A77 Mk II , Teac A 4010s, 4070, Sony TC102A, Magnecord 1020, Systemdek IIX/Dynavector Karat 17D2MKII, CEC CD3300 CDP, K Works NanoMax DAC, Van Alsine Transcendence Eight+ tube preamp, Dynaco MkIV amp pair, Paradigm Reference Studio 100 v1