Check out the new Tape Project website at tapeproject.com, now with online ordering. Inventory is updated every week, so stop by often to see what we have in stock.

Author Topic: Signal Generators  (Read 5343 times)

Offline astrotoy

  • Sr. Member
  • ****
  • Posts: 377
    • View Profile
Signal Generators
« on: September 29, 2016, 09:57:51 AM »
Does anyone have an extra signal generator?  I need one to set the bias for recording on my new ATR-102.  My tech also said I could use a test CD - I think I have an old Stereophile Test CD with test tones.  Could I use the Tape Project allignment tape and connect the output of my Technics/Bottlehead to the input of the ATR-102?

Thanks, Larry

Larry Toy CharterMember-BHReproTechnics1506/Akai747dbx/OtariMX5050B3-ClassicalVinylFreak-15Krecs-VPIHRXRimDrv-LyraSkala-HelikonMono-HerronVTSP3A/BHPhonoPre-PacificMicrosonics Model2 - Pyramix&MykerinosCard-OppoNE-Proceed AVP2+6/CVP2-CJ MET1-Cary 2A3SE-AvantgardeDuos-3Solos-VelodyneDD18Sub

Offline c1ferrari

  • Full Member
  • ***
  • Posts: 167
    • View Profile
Re: Signal Generators
« Reply #1 on: October 04, 2016, 08:50:26 PM »
Hi Larry,

MRL cal tapes appear to be the de facto standard.
Tones from a CD should be fine.

HTH,

Sam
Sam Lucero
SPQCV
:-)