Can you believe it? Tape Project is ten years old! Thanks to everyone who has supported us in introducing studio quality tape reproduction to the audiophile community!

Author Topic: Signal Generators  (Read 1190 times)

Offline astrotoy

  • Sr. Member
  • ****
  • Posts: 377
    • View Profile
Signal Generators
« on: September 29, 2016, 09:57:51 AM »
Does anyone have an extra signal generator?  I need one to set the bias for recording on my new ATR-102.  My tech also said I could use a test CD - I think I have an old Stereophile Test CD with test tones.  Could I use the Tape Project allignment tape and connect the output of my Technics/Bottlehead to the input of the ATR-102?

Thanks, Larry

Larry Toy CharterMember-BHReproTechnics1506/Akai747dbx/OtariMX5050B3-ClassicalVinylFreak-15Krecs-VPIHRXRimDrv-LyraSkala-HelikonMono-HerronVTSP3A/BHPhonoPre-PacificMicrosonics Model2 - Pyramix&MykerinosCard-OppoNE-Proceed AVP2+6/CVP2-CJ MET1-Cary 2A3SE-AvantgardeDuos-3Solos-VelodyneDD18Sub

Offline c1ferrari

  • Full Member
  • ***
  • Posts: 167
    • View Profile
Re: Signal Generators
« Reply #1 on: October 04, 2016, 08:50:26 PM »
Hi Larry,

MRL cal tapes appear to be the de facto standard.
Tones from a CD should be fine.

HTH,

Sam
Sam Lucero
SPQCV
:-)