Can you believe it? Tape Project is ten years old! Thanks to everyone who has supported us in introducing studio quality tape reproduction to the audiophile community!

Author Topic: Worried About Tape Head When Rewinding  (Read 10682 times)

Offline commonman

  • Jr. Member
  • **
  • Posts: 12
    • View Profile
Worried About Tape Head When Rewinding
« on: October 15, 2016, 09:21:07 PM »
I have an Otari 4 track. I've noticed that when fast rewinding, I can hear that "squiggly sound" - which in my mind, means the head is in contact with the tape when rewinding. This, in turn, also means more wear on the heads. My question is - is this normal? I would think that something would lift the tape away from the heads when fast rewinding. For a while, every time I did a fast, long rewind, I would pull down on some bars that are located on either side of the heads which moves the tape away from the heads. I guess Im wondering why these bars don't automatically engage when fast rewinding.
Jim Freschi

Offline docb

  • Administrator
  • leader in spreading disinformation
  • *****
  • Posts: 1345
    • View Profile
    • Bottlehead Corp.
Re: Worried About Tape Head When Rewinding
« Reply #1 on: October 15, 2016, 09:43:37 PM »
They are called tape lifters, and they may need some adjustment.
Dan "Doc B." Schmalle
President for Life, Bottlehead Corp.
Managing Director - retired, The Tape Project

Offline commonman

  • Jr. Member
  • **
  • Posts: 12
    • View Profile
Re: Worried About Tape Head When Rewinding
« Reply #2 on: October 17, 2016, 10:21:52 AM »
OK - Is this a big operation to make this adjustment?  I wonder if I can do it myself.
Jim Freschi

Offline docb

  • Administrator
  • leader in spreading disinformation
  • *****
  • Posts: 1345
    • View Profile
    • Bottlehead Corp.
Re: Worried About Tape Head When Rewinding
« Reply #3 on: October 17, 2016, 12:08:56 PM »
I'm pretty sure that if you locate a service manual it would have instructions for the adjustment.
Dan "Doc B." Schmalle
President for Life, Bottlehead Corp.
Managing Director - retired, The Tape Project

Offline ironbut

  • Global Moderator
  • leader in spreading disinformation
  • *****
  • Posts: 2503
  • rs1500>repro amp#1
    • View Profile
Re: Worried About Tape Head When Rewinding
« Reply #4 on: October 19, 2016, 11:32:20 AM »
The lifters are supposed to be "lifting" when the machine is in stop.
Lay your machine on it's back and see if there is space between the tape and the head when stopped. If there is, put it in rewind/fast forward and watch to see if the lifters go down. If not, the sound you're hearing is just because the tape is close enough to the repro head for a little playback.
Some machines turn the playback amp off during rewind and fast forward others don't.
As long as the lifters are working, the sound isn't a problem.
steve koto
 Sony scd 777es(R. Kern mods)> Vpi Aires>Dynavector XX-2mkll>Bent mu>CAT ultimate>CJ premeir 140>Magnepan 1.6qr(Jensen xover)Headphone Eddie Current Zana Deux>AT ad2000,HD800 ,Metric Halo ULN-2 (battery powered),
 HE Audio Jades