Check out the new Tape Project website at tapeproject.com, now with online ordering. Inventory is updated every week, so stop by often to see what we have in stock.

Author Topic: Revox Hubs on Otari MX-5050 BIII  (Read 5966 times)

Offline astrotoy

  • Sr. Member
  • ****
  • Posts: 377
    • View Profile
Revox Hubs on Otari MX-5050 BIII
« on: February 11, 2017, 12:38:58 AM »
Hi Folks, I sold my Otari MX5050BIII.  It has a pair of Tascam hubs on it for NAB reels.  The buyer asked me whether Revox NAB hubs would fit on it. I said I thought so, but I never tried that, since the Tascam hubs always worked fine.  Did I say the right thing?   Thanks, Larry
Larry Toy CharterMember-BHReproTechnics1506/Akai747dbx/OtariMX5050B3-ClassicalVinylFreak-15Krecs-VPIHRXRimDrv-LyraSkala-HelikonMono-HerronVTSP3A/BHPhonoPre-PacificMicrosonics Model2 - Pyramix&MykerinosCard-OppoNE-Proceed AVP2+6/CVP2-CJ MET1-Cary 2A3SE-AvantgardeDuos-3Solos-VelodyneDD18Sub

Offline russe41

  • Jr. Member
  • **
  • Posts: 6
    • View Profile
Re: Revox Hubs on Otari MX-5050 BIII
« Reply #1 on: February 21, 2017, 08:06:47 AM »
I actually used one teac and one revox hub on my 5050B-lll 2 machine this past weekend with no problems.

Offline astrotoy

  • Sr. Member
  • ****
  • Posts: 377
    • View Profile
Re: Revox Hubs on Otari MX-5050 BIII
« Reply #2 on: March 03, 2017, 01:29:32 AM »
Thanks.  The person who bought my BIII thinks the Revox hubs look really nice.    Larry
Larry Toy CharterMember-BHReproTechnics1506/Akai747dbx/OtariMX5050B3-ClassicalVinylFreak-15Krecs-VPIHRXRimDrv-LyraSkala-HelikonMono-HerronVTSP3A/BHPhonoPre-PacificMicrosonics Model2 - Pyramix&MykerinosCard-OppoNE-Proceed AVP2+6/CVP2-CJ MET1-Cary 2A3SE-AvantgardeDuos-3Solos-VelodyneDD18Sub