Check out the new Tape Project website at tapeproject.com, now with online ordering. Inventory is updated every week, so stop by often to see what we have in stock.

Author Topic: MX 5050 IIB service manual  (Read 5862 times)

Offline Arnold_Layne

  • Full Member
  • ***
  • Posts: 31
    • View Profile
MX 5050 IIB service manual
« on: April 17, 2008, 08:01:41 AM »
Would some kind soul with a service manual to a MX5050 IIB be willing to email me a scan of the page that shows you how to adjust the pinch roller pressure? I installed a new roller on my deck, but there doesn't seem to be enough tension. The tape tends to move side to side with the new roller which I bought direct from Athan. If a apply additional pressue to the assembly by hand the side to side motion stops.

TIA

Steve

Offline Ki Choi

  • Sr. Member
  • ****
  • Posts: 314
    • View Profile
Re: MX 5050 IIB service manual
« Reply #1 on: April 18, 2008, 02:33:28 PM »
Send me an email.

Ki
Ki Choi

Offline Arnold_Layne

  • Full Member
  • ***
  • Posts: 31
    • View Profile
Re: MX 5050 IIB service manual
« Reply #2 on: April 21, 2008, 05:41:08 PM »
I'm still looking for an answer to this question: I need to know how to access the pinch roller tension on an MX5050 IIB


A_L

Offline Ki Choi

  • Sr. Member
  • ****
  • Posts: 314
    • View Profile
Re: MX 5050 IIB service manual
« Reply #3 on: April 22, 2008, 01:40:58 AM »
If you would send me an email at [email protected], I will send you the section 6.3 Capstan Pinch Roller Pressure Adjustment pages.

Ki
Ki Choi

Offline Arnold_Layne

  • Full Member
  • ***
  • Posts: 31
    • View Profile
Re: MX 5050 IIB service manual
« Reply #4 on: April 22, 2008, 06:47:00 AM »
I did send an email but it must not have gone thru. I will resend.