TP-027, Jerry Garcia / David Grisman wins a Writer's Choice Award from Myles Astor of Positive Feedback Online

Author Topic: MX 5050 IIB service manual  (Read 5861 times)

Offline Arnold_Layne

  • Full Member
  • ***
  • Posts: 31
    • View Profile
MX 5050 IIB service manual
« on: April 17, 2008, 08:01:41 AM »
Would some kind soul with a service manual to a MX5050 IIB be willing to email me a scan of the page that shows you how to adjust the pinch roller pressure? I installed a new roller on my deck, but there doesn't seem to be enough tension. The tape tends to move side to side with the new roller which I bought direct from Athan. If a apply additional pressue to the assembly by hand the side to side motion stops.

TIA

Steve

Offline Ki Choi

  • Sr. Member
  • ****
  • Posts: 314
    • View Profile
Re: MX 5050 IIB service manual
« Reply #1 on: April 18, 2008, 02:33:28 PM »
Send me an email.

Ki
Ki Choi

Offline Arnold_Layne

  • Full Member
  • ***
  • Posts: 31
    • View Profile
Re: MX 5050 IIB service manual
« Reply #2 on: April 21, 2008, 05:41:08 PM »
I'm still looking for an answer to this question: I need to know how to access the pinch roller tension on an MX5050 IIB


A_L

Offline Ki Choi

  • Sr. Member
  • ****
  • Posts: 314
    • View Profile
Re: MX 5050 IIB service manual
« Reply #3 on: April 22, 2008, 01:40:58 AM »
If you would send me an email at [email protected], I will send you the section 6.3 Capstan Pinch Roller Pressure Adjustment pages.

Ki
Ki Choi

Offline Arnold_Layne

  • Full Member
  • ***
  • Posts: 31
    • View Profile
Re: MX 5050 IIB service manual
« Reply #4 on: April 22, 2008, 06:47:00 AM »
I did send an email but it must not have gone thru. I will resend.