Can you believe it? Tape Project is ten years old! Thanks to everyone who has supported us in introducing studio quality tape reproduction to the audiophile community!

Author Topic: Lasermedia CL-100 TapeHead Cleaner - Question  (Read 7298 times)

Offline astrotoy

  • Sr. Member
  • ****
  • Posts: 377
    • View Profile
Lasermedia CL-100 TapeHead Cleaner - Question
« on: May 11, 2008, 11:13:22 PM »
I recently bought an 8oz can. Now how do I open the can?  There is a metal piece which doesn't budge when I took off the screw cap. I'm not very mechanically inclined. Thanks, Larry
Larry Toy CharterMember-BHReproTechnics1506/Akai747dbx/OtariMX5050B3-ClassicalVinylFreak-15Krecs-VPIHRXRimDrv-LyraSkala-HelikonMono-HerronVTSP3A/BHPhonoPre-PacificMicrosonics Model2 - Pyramix&MykerinosCard-OppoNE-Proceed AVP2+6/CVP2-CJ MET1-Cary 2A3SE-AvantgardeDuos-3Solos-VelodyneDD18Sub

Offline Studer Fool

  • Full Member
  • ***
  • Posts: 72
    • View Profile
Re: Lasermedia CL-100 TapeHead Cleaner - Question
« Reply #1 on: May 12, 2008, 07:46:20 AM »
Take a medium screwdriver, punch through the middle of the inner cap ("metal piece") & pry.  Careful where you do it in case you spill!  (it's not worth saving the inner cap btw)

Yours Truly in Tape Tom Foolery!
cdw
Christopher D. Wait
Charter Subscriber SN# 026
Studer A80-VU & Studer A80-RC (and Doc's lovingly modified Ampex 934 with Seduction Tape Head Preamp Combo!)

Offline astrotoy

  • Sr. Member
  • ****
  • Posts: 377
    • View Profile
Re: Lasermedia CL-100 TapeHead Cleaner - Question
« Reply #2 on: May 12, 2008, 03:59:52 PM »
Thanks for the help. It worked. Larry
Larry Toy CharterMember-BHReproTechnics1506/Akai747dbx/OtariMX5050B3-ClassicalVinylFreak-15Krecs-VPIHRXRimDrv-LyraSkala-HelikonMono-HerronVTSP3A/BHPhonoPre-PacificMicrosonics Model2 - Pyramix&MykerinosCard-OppoNE-Proceed AVP2+6/CVP2-CJ MET1-Cary 2A3SE-AvantgardeDuos-3Solos-VelodyneDD18Sub