Tape Machines > Tape Project Machines
bypassing preamp on otari mx 5050
(1/1)
tfrei:
Hi. I'm new to this forum. I'm looking all over for some guides on bypassing the otari mx 5050 internal (stock) preamp. I've done various searches on this forum, but I don't see any specific guides. IF there is one, could we put it as a "sticky" in this section of the forum. This section would be the obvious first place to go for this type of information, I think.
posted by Tom Frei, a newbie who just bought a Otari mx 5050.
docb:
Shawn Phelps did the original MX-5050 mod at Bottlehead. I'll ask him if maybe he can take a pic or two of his deck showing which cables you need to move.
tfrei:
Thank you. That is probably the same Shawn Phelps who is building my new eros tape head (once he gets the kit). I think I'm also going to look for a manual. Am I right that there are two manuals: a user manual and a service manual?
ironbut:
Hey tom,
Welcome to the forum.
There are a number of manuals and schematic packs for the Otari.
You should be able to download them all (including some you don't need) from a link located in our "Links" sticky.
That sticky is located above the General forum.
The post that contains the links in #19.
Be sure and save those manuals. They were missing in action and a member here was kind enough to bring them together and make them available.
Navigation
[0] Message Index
Go to full version