Tape Machines > Tape Tech
Studer A810 BIN file for 25/91 version firmware
hafrse:
--- Quote from: Ki Choi on May 27, 2009, 11:41:08 AM ---I had also inquired about sourcing the IC10 firmware BIN file to other pros and Studer users who had multiple A810s. No one had archived the various firmware versions so far...
It had occured to me - the machines like Studers that used commonly available electronics parts for their boards in the 70's and 80's can be serviced in the future with vintage parts from other electronics gear and other Studers. However, for the firmware - it will be hard to replace once Studer officially stops supporting the analog machines in 2010. So until then, the firmware IP belongs to Studer and can't be publically archived and distributed.
For my original needs, fortunately, Angle from this fourm had offered to loan me the MPU board with the version of firmware I was looking for and soon I will rebuild the library of 25/91 version firmware BIN files.
With unfortunate demise of the Studer List, I am considering archiving collection of different firmware versions for Studer A810, A807, A820 and other models. So, if you own a Studer recorder and want to archive your firmware, please contact me. I may already have the BIN files but if not, I can help you extract the data and save them as BIN files to be used later to burn replacement firmware Eproms.
Ki
--- End quote ---
Hi ,
Is there a possility to get a copy of the bin files for the EPROM of the Studer A810?have problems in mine. many thanks in advance!
hafrse:
--- Quote from: hafrse on January 07, 2020, 03:57:36 PM ---
--- Quote from: Ki Choi on May 27, 2009, 11:41:08 AM ---I had also inquired about sourcing the IC10 firmware BIN file to other pros and Studer users who had multiple A810s. No one had archived the various firmware versions so far...
It had occured to me - the machines like Studers that used commonly available electronics parts for their boards in the 70's and 80's can be serviced in the future with vintage parts from other electronics gear and other Studers. However, for the firmware - it will be hard to replace once Studer officially stops supporting the analog machines in 2010. So until then, the firmware IP belongs to Studer and can't be publically archived and distributed.
For my original needs, fortunately, Angle from this fourm had offered to loan me the MPU board with the version of firmware I was looking for and soon I will rebuild the library of 25/91 version firmware BIN files.
With unfortunate demise of the Studer List, I am considering archiving collection of different firmware versions for Studer A810, A807, A820 and other models. So, if you own a Studer recorder and want to archive your firmware, please contact me. I may already have the BIN files but if not, I can help you extract the data and save them as BIN files to be used later to burn replacement firmware Eproms.
Ki
--- End quote ---
Hi ,
Is there a possility to get a copy of the bin files for the EPROM of the Studer A810?have problems in mine. many thanks in advance!
--- End quote ---
Hi ,
Is there a possility to get a copy of the bin files for the EPROM of the Studer A810?have problems in mine. many thanks in advance!
Navigation
[0] Message Index
[*] Previous page
Go to full version