Tape Project Forum

Tape Machines => Tape Tech => Topic started by: eugen_syd on June 02, 2010, 02:23:24 AM

Title: Aligment of a REVOX C270
Post by: eugen_syd on June 02, 2010, 02:23:24 AM
Hi Everybody,

I rebuild a REVOX C270 reel to reel and I need to do the electrical alignment procedure. REVOX service manual call for an extension card for that. Anybody has one I can borrow or purchase?
Also anyone has experience with this procedure? Anything I need to know beside what is written in the revox service manual? I am setting the machine up for 3-3/4" and 7-1/2ips NAB equalization.
Any advice is much appreciated.

Best regards from down under

Eugen
Title: Re: Aligment of a REVOX C270
Post by: eugen_syd on June 14, 2010, 09:06:39 PM
I finally completed the alignmet. The sound you get out of an REVOX C270 is beyond any expectations. Never had anything better than a well aligned REVOX B77. The alignment a little tricky, might be easier if you speak German but got it done somehow. All efforts well worthed!

Eugen