Check out the new Tape Project website at tapeproject.com, now with online ordering. Inventory is updated every week, so stop by often to see what we have in stock.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - docb

Pages: 1 [2] 3 4 ... 91
16
General Discussion / Re: Worried About Tape Head When Rewinding
« on: October 15, 2016, 09:43:37 PM »
They are called tape lifters, and they may need some adjustment.

17
Tape Project Machines / Re: User Manual for Technics RS1520?
« on: September 22, 2016, 12:49:35 PM »
Original post is 8 years old. The fact that you responded to a request 8 years after your original post is very kind of you, and also exceptionally rare. Thus it is generally considered proper netiquette for the second poster to have started a new thread rather than trying to revive a dead one.

18
Tape Project Machines / Re: User Manual for Technics RS1520?
« on: September 20, 2016, 03:10:55 PM »

19
Tape Tech / Re: Safe monitor speaker to R2R deck distance?
« on: September 08, 2016, 08:17:55 AM »
It will depend somewhat upon the strength of the magnets in the speakers, but in general the setup you describe sounds OK.

20
I would suggest that if you want the sound of a studio tape machine, buy a studio tape machine like an AG440 or A80. Using 456 will be a very dicey proposition because the majority of it suffers from sticky shed. I would lean toward buying current production tape from ATR Magnetics or RMGI/Pyral for recording anything of value.

21
General Discussion / Re: Nagra T
« on: August 16, 2016, 12:13:45 PM »
Hold the reels to tension the tape and press stop.

Another tip - put the machine in load mode when you turn it off.

22
Tape Project Albums - general / Re: Tp 029 and 030
« on: August 04, 2016, 09:39:21 AM »
One recording we hope to release was done just a few months ago and will be getting edited this fall. That one will probably be ready for release by year's end. Paul has been out of the country the past month. Regarding classic recordings from major labels - he had requested a couple of titles before he left, and will be working on them when he returns.

In the meantime we have been working to keep all of our currently licensed titles in stock. It's a very good time for anyone who might want to pick up a title or two from their wish list.

23
Tape Tech / Re: 1 mil 1/2" Tape Question
« on: July 22, 2016, 04:09:29 PM »
I dunno, it's a puzzle. Uher SM does not come up for me. I can only find one reference to Uher branded tape, called Z817, and it's a 1/4" 1 mil reel. And I can only find one Uher deck that could use a 10.5" reel, the SG530L, which appears to have been a 1/4" deck. And of course SM911 is 1.5 mil.

I did find an interesting mention of .75 and .5 mil 1/2" tape being developed for video use back in the 70s, in an old scan from Billboard magazine. So it's not impossible that such a beast could exist. Also it looks like BASF 931 was available in 5000 ft. 10.5" reels.

http://www.ebay.com/itm/1-REEL-BASF-931-DIGITAL-RECORDING-TAPE-1-2-x-5000-NEW-FACTORY-SEALED-/111929790369?hash=item1a0f890fa1:g:xwgAAOSwYlJW3y7~

24
Tape Tech / Re: 1 mil 1/2" Tape Question
« on: July 22, 2016, 02:16:39 PM »
That would pretty much have to be .75 mil tape.

25
Raw Tape / Re: Live recording La Boheme 2/16/74
« on: May 14, 2016, 08:44:49 AM »
NABET would more likely be NAB EQ.

26
Events / Tape discussion at Axpona 2016, Friday April 15th, 3:15-4:15
« on: April 06, 2016, 03:08:42 PM »
Tape: The Format Of The Future (with a short history of its Glorious Past)

Chad Kassem, Acoustic Sounds
Paul Stubblebine, The Tape Project
Chris Mara, Welcome to 1979
Dan Labrie, ATR Service and ATR Magnetics
Myles Astor, Journalist


Meet pros who are directly involved in the Tape Renaissance

Find out how easy it can be to have a studio quality tape machine playing back Master Tape Copies in your listening room.

How to get the most out of the format, making sure your tape machine is operating at its best.

27
General Discussion / Re: Studer B67 - help!
« on: March 25, 2016, 09:09:47 AM »
My first thought is that you may have some power supply capacitors that are leaking and need to be replaced.

28
Sounds like the new bearing needs some adjustment or lubricant, or both.

29
Here's an Otari ad showing the tape threaded under the floating post, like your first picture.


30
Events / It's been TEN years!
« on: January 29, 2016, 10:50:41 PM »
The Tape Project is ten years old! That's right, it has been ten years since we introduced the concept of studio quality tape to the audiophile community. Thanks to everyone who has supported over the years.

http://tapeproject.com/catalog/

Pages: 1 [2] 3 4 ... 91