TP-027, Jerry Garcia / David Grisman wins a Writer's Choice Award from Myles Astor of Positive Feedback Online

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - dmnieto

Pages: [1]
1
Reel to Reel Tape Machines / Re: Recording meters for Studer A807
« on: October 09, 2015, 08:39:12 AM »
This guy is selling 2 sets for $99, may be your best bet

http://www.ebay.com/itm/181891202828

2
Reel to Reel Tape Machines / Upgrading Studer A807 15ips to 30ips
« on: August 31, 2015, 06:03:18 PM »
Hi,

I have a studer A807 MK1 standard, and I was wondering if it is safe to upgrade it to 30ips.

From what I see, in order to set up the Studer A807 to 30ips it is necessary to:
1) Change the jumper in the control panel to HS mode
2) Modify jumpers W5/W6 in the audio control board to set the correct EQ parameters for High Speed.

Everything else in the machine seems to work with 30ips.

My question is, do I need a different capstan to support 30 ips? I currently have the 1.021.605.81, and nowhere in the documentation or in the parts list there is a mention that a special capstan is needed for the A807 to work with 30ips, but that is, for example, the case of the A810. That machine lists two different capstans (2 pole 15ips, 4 pole 30ips).

Anybody has done the experiment?


3
Tape Tech / Re: Firmware versions for Studer A807 ....
« on: August 31, 2015, 02:41:22 PM »
Hi Ki,

I am in the hunt for the BIN files for the a807 MK1 (30.88 and 40.87), do you have them?

You need the 1.717.651.26 chip.  It is IC14.

Send me an email if you can't locate the BIN file.

Ki

Pages: [1]