TP-027, Jerry Garcia / David Grisman wins a Writer's Choice Award from Myles Astor of Positive Feedback Online

Author Topic: Comparing the Sound of Barclay Crocker Dolby B Tapes to Vinyl  (Read 22667 times)

Offline astrotoy

  • Sr. Member
  • ****
  • Posts: 377
    • View Profile
Over the past week or so I have been listening to a fair number of my Barclay-Crocker tapes (I have about 110 of them). I also have the vinyl versions of about half (all of the Argo, L'Oiseau Lyre, some Vanguards and a few others). I have felt in the past that most all of the B-C tapes come quite close to the vinyl versions (provided that the vinyl is in good shape), but there was a little gap. The problem has been in the dolby B decoder - I have been using an Advent Model 100, which was the best I could find. When playing in the bypass mode, it was clear that the electronics add a definite coloration to the music. It is less noticeable with dolby B decoding engaged, since the positive effects of the decoding mask a lot of the electronic coloration. However, this has changed! I have been using a prototype dolby B decoder that was built by one of our members. The sound of the B-C tapes is quite incredible - really comparable to the sound of the vinyl. I have never heard prerecorded 7.5ips tape sound so good. One comment, as you have probably read in my other posts, the TP tapes are a full step better than the vinyl. But other than that, I haven't heard anything like the B-C tapes with this decoder. Characteristics of the sound - depth of soundfield, wonderful hall ambience, clarity of instruments, lack of electronic glaze.

I have been playing the tapes with my Bottlehead Technics 1506 using the quarter track playback heads - through the Bottlehead Repro preamp and then through the decoder. I have been using the balanced outputs of the Repro. The decoder accepts balanced inputs - but also can be modified to accept RCA inputs.

The lack of true audiophile quality dolby B decoders has been a real problem to those who want to hear the best out of their tapes. The creator of this wonderful device may want to comment on what was done. 

Larry   
Larry Toy CharterMember-BHReproTechnics1506/Akai747dbx/OtariMX5050B3-ClassicalVinylFreak-15Krecs-VPIHRXRimDrv-LyraSkala-HelikonMono-HerronVTSP3A/BHPhonoPre-PacificMicrosonics Model2 - Pyramix&MykerinosCard-OppoNE-Proceed AVP2+6/CVP2-CJ MET1-Cary 2A3SE-AvantgardeDuos-3Solos-VelodyneDD18Sub

mep

  • Guest
Re: Comparing the Sound of Barclay Crocker Dolby B Tapes to Vinyl
« Reply #1 on: June 03, 2009, 01:00:56 PM »
Larry-If you are using the Bottlehead repro unit, does that mean you are using IEC playback equalization for 15 ips tapes?

Offline astrotoy

  • Sr. Member
  • ****
  • Posts: 377
    • View Profile
Re: Comparing the Sound of Barclay Crocker Dolby B Tapes to Vinyl
« Reply #2 on: June 03, 2009, 05:26:02 PM »
Mark, the Repro has a switch in front for NAB or IEC. For the prerecorded tapes other than TP, I use NAB EQ. For the tapes I have done from my 45 Vinyl collection, I recorded and am playing back on IEC. AFAIK, all the commercial 7.5ips tapes I have are NAB, which I use.  Thanks, Larry
Larry Toy CharterMember-BHReproTechnics1506/Akai747dbx/OtariMX5050B3-ClassicalVinylFreak-15Krecs-VPIHRXRimDrv-LyraSkala-HelikonMono-HerronVTSP3A/BHPhonoPre-PacificMicrosonics Model2 - Pyramix&MykerinosCard-OppoNE-Proceed AVP2+6/CVP2-CJ MET1-Cary 2A3SE-AvantgardeDuos-3Solos-VelodyneDD18Sub

Offline ironbut

  • Global Moderator
  • leader in spreading disinformation
  • *****
  • Posts: 2503
  • rs1500>repro amp#1
    • View Profile
Re: Comparing the Sound of Barclay Crocker Dolby B Tapes to Vinyl
« Reply #3 on: June 04, 2009, 12:18:52 AM »
Thanks for the kind words Larry.
Just like when I first decided to get back into reel to reel, I always thought that the Barclay-Crocker tapes had a lot more in them than is generally thought. And like a few other members here, I went through a number of Dolby decoder units and found that they were all either edgy and hard sounding or muffled and veiled sounding. Neither genre had any soundstage to speak of and they robbed the tapes of that rich midrange that I love magnetic tape for.
After unsuccessfully trying to find someone to modify and upgrade one for me I finally decided to do it myself. It involved endless trial and error upgrades (over 2 years on and off) and Larry has the results.

The unit does pretty well with BC tapes but on some other brands, it does a fine job of showing just how important it is to have high duplication standards. The BC's also have the advantage of having a calibration tone included. From my experience, I don't think that it's necessary to have the calibration spot on but it does need to be close ( the spec is +/-  2dB).

I've still got some fiddling around to add a little gain for our tube repro gear but for balanced in and single ended out, it's finally done! Yippie!

Oh shoot! I forgot to say that the working name for this unit (since it spent so much time being experimented on) is " Pavlov's Dolby".


« Last Edit: June 04, 2009, 12:23:56 AM by ironbut »
steve koto
 Sony scd 777es(R. Kern mods)> Vpi Aires>Dynavector XX-2mkll>Bent mu>CAT ultimate>CJ premeir 140>Magnepan 1.6qr(Jensen xover)Headphone Eddie Current Zana Deux>AT ad2000,HD800 ,Metric Halo ULN-2 (battery powered),
 HE Audio Jades

Offline xcortes

  • Sr. Member
  • ****
  • Posts: 383
    • View Profile
Another lucky owner of Steve's unit
« Reply #4 on: November 23, 2009, 10:17:25 PM »
Steve was kind enough to build one of his units for me. It has been sitting on the rack waiting for the ATR deck and the Bottlehead Tube Repro for some months but since they are taking forever to arrive I decided to give it a try. I fixed a set of cables and connected a BH Sex amp as an additional gain stage between the Seduction and the Dolby unit (the Seduction doesn't have enough gain to get the unit to operate correctly). I let it burn in for a few reels and tonight I finally sit to fully test it.

It is very, very good. The BC tapes sound nothing short of spectacular. As opposed to Larry's perception I do detect a very light "electronic glaze". The decoder doesn't deny it's 70's electronics heritage (or is it the BC tapes that show that heritage?). But gone is the coloration and mudiness associated with Dolby processors. There's lots of detail and the timbre of the instruments is right on the spot. The unit is silent and doesn't add noticeable noise.

Ironbut got this one right!

I listened to selections of various tapes but in particular I listened to Mozart Sinfonia Concertante for Violin and Viola (Argo F 679) and to the spectacularly sounding Rimsky-Korsakov's Scherezade (Philips 6500-410). Following the Dolby unit is a Bottlehead Extended Foreplay preamp and six BH 300B Paramounts with Magnequest iron that triamp what used to be a set of Edgarhorns that now utilize RCA 1930's field coil drivers for the mids, a Karlson K18 with a sand amp fills the bass below.
« Last Edit: November 23, 2009, 10:19:48 PM by xcortes »
Xavier Cortes

Offline docb

  • Administrator
  • leader in spreading disinformation
  • *****
  • Posts: 1345
    • View Profile
    • Bottlehead Corp.
Re: Comparing the Sound of Barclay Crocker Dolby B Tapes to Vinyl
« Reply #5 on: November 23, 2009, 10:57:34 PM »
Just to clarify, your Repro was done some time ago and sent off to ATR Services. So for once we aren't the Bottleneck.
Dan "Doc B." Schmalle
President for Life, Bottlehead Corp.
Managing Director - retired, The Tape Project

Offline xcortes

  • Sr. Member
  • ****
  • Posts: 383
    • View Profile
Re: Comparing the Sound of Barclay Crocker Dolby B Tapes to Vinyl
« Reply #6 on: November 23, 2009, 10:58:17 PM »
Yep
Xavier Cortes

Offline ironbut

  • Global Moderator
  • leader in spreading disinformation
  • *****
  • Posts: 2503
  • rs1500>repro amp#1
    • View Profile
Re: Comparing the Sound of Barclay Crocker Dolby B Tapes to Vinyl
« Reply #7 on: November 23, 2009, 11:09:27 PM »
Thanks Xavier,

I think that once those Blackgates break in, most of that haze should disappear and the soundstage will get nice and deep.
I generally leave the decoder powered up all the time (it's pretty low wattage) and it take a lot of hours to get it sounding right.
Give that guitar trio tape a try. It sounds pretty darn good.

I really enjoy the BC's and while they're surprisingly good sounding, I don't think that they are any competition to the Tape Project tapes. My hopes in fact, are that they can supplement them and increase the joys of reel to reel ownership.

Speaking of Repros, how many are out there now?


steve koto
 Sony scd 777es(R. Kern mods)> Vpi Aires>Dynavector XX-2mkll>Bent mu>CAT ultimate>CJ premeir 140>Magnepan 1.6qr(Jensen xover)Headphone Eddie Current Zana Deux>AT ad2000,HD800 ,Metric Halo ULN-2 (battery powered),
 HE Audio Jades

Offline docb

  • Administrator
  • leader in spreading disinformation
  • *****
  • Posts: 1345
    • View Profile
    • Bottlehead Corp.
Re: Comparing the Sound of Barclay Crocker Dolby B Tapes to Vinyl
« Reply #8 on: November 24, 2009, 10:31:18 AM »
Quote
Speaking of Repros, how many are out there now?

I think we just finished number 16 which will hopefully be doing duty at CES in January, and we just got a request to start number 17 to go with an A807.
Dan "Doc B." Schmalle
President for Life, Bottlehead Corp.
Managing Director - retired, The Tape Project

Offline xcortes

  • Sr. Member
  • ****
  • Posts: 383
    • View Profile
Re: Comparing the Sound of Barclay Crocker Dolby B Tapes to Vinyl
« Reply #9 on: November 25, 2009, 11:15:16 AM »
Quote
I generally leave the decoder powered up all the time (it's pretty low wattage) and it take a lot of hours to get it sounding right.
Give that guitar trio tape a try. It sounds pretty darn good.

The guitar trio tape is spectacular. Very natural sound with lots of details. And the music is very nice too.

Unfortunately I can't leave the unit all of the time. You see, the way I leave home with peace of mind about my kids not getting shocked by any of my nine Bottlehead amps or my high voltage field coil speakers is by switching the complete circuit off. I could connect the Dolby unit to another circuit but then I would probably risk getting some ground loops as well as loosing the benefits of my power plant.

I'm really enjoying my Pavlov's Dolby. BC is a very comprehensive classical music compendium with a nice balance of styles, composers, orchestras and directors. Since last weekend it is very good sounding too.

 
Xavier Cortes

Offline Gkar

  • Full Member
  • ***
  • Posts: 105
  • Randy Warren
    • View Profile
Re: Comparing the Sound of Barclay Crocker Dolby B Tapes to Vinyl
« Reply #10 on: February 17, 2010, 08:08:25 PM »
Steve, do you have any info on what you have done to the Dolby decoder, or what model you have modified?  thanks
"Music possesses far richer means of expression, and it is a more subtle medium in which to translate the thousand shifting moments in the mood of a soul." - Tchaikovsky

Offline Thomas

  • Newbie
  • *
  • Posts: 3
  • Music was my first love
    • View Profile
Re: Comparing the Sound of Barclay Crocker Dolby B Tapes to Vinyl
« Reply #11 on: March 04, 2021, 04:24:20 PM »
Thanks for the kind words Larry.
Just like when I first decided to get back into reel to reel, I always thought that the Barclay-Crocker tapes had a lot more in them than is generally thought. And like a few other members here, I went through a number of Dolby decoder units and found that they were all either edgy and hard sounding or muffled and veiled sounding. Neither genre had any soundstage to speak of and they robbed the tapes of that rich midrange that I love magnetic tape for.
After unsuccessfully trying to find someone to modify and upgrade one for me I finally decided to do it myself. It involved endless trial and error upgrades (over 2 years on and off) and Larry has the results.

The unit does pretty well with BC tapes but on some other brands, it does a fine job of showing just how important it is to have high duplication standards. The BC's also have the advantage of having a calibration tone included. From my experience, I don't think that it's necessary to have the calibration spot on but it does need to be close ( the spec is +/-  2dB).

I've still got some fiddling around to add a little gain for our tube repro gear but for balanced in and single ended out, it's finally done! Yippie!

Oh shoot! I forgot to say that the working name for this unit (since it spent so much time being experimented on) is " Pavlov's Dolby".

Dear Steve, I hope you are doing fine? I would be interested by getting a Pavlov Dolby from you... assuming you would recommend that for my A77 4 track to play BC tapes ;-) Many thanks fro your answer! cheers to you PS: [email protected]
Crazy about Hard bop Jazz, Soul, Ska, Otis, Nina, Janis, Jim & Marin Marais (Baroque)

Revox PR99 stock (not B77 HS as planned) for the moment dreaming of connecting my pair of LEAK to tape head pre amp and improving Transport as much as possible