TP-028, Nat Adderley's Work Song is now available

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - steve00021

Pages: [1]
1
General Discussion / Studer A810 Headblock Wiring
« on: December 04, 2016, 09:38:26 AM »
Hi
Can anyone tell me the pin outs of the 25Dsub connector on the A810 head block.
I have an empty head block and need to wire new heads to it.
I have found info for the record heads, I know the repro heads go to the repro preamp, but iam struggling with the erase head.
I can see where a 2 track or staggered erase would go, but i want to fit a full track erase head, cant seem to find any info in the studer manual.

many thanks

2
Reel to Reel Tape Machines / Studer A810 Strange Transport Problem
« on: April 02, 2015, 02:58:49 AM »
Hi All

I have a very strange transport problem..
when the leader section of the tape is passing the heads, the MPU board will do a reset & display software version 46/90 just like you have powered it up...
when the tape its self is in contact with the head it will play fine...
I have tried different types of leader tape & they all do the same thing..???

;-)

3
Tape Tech / A810 318 amorphous butterfly heads & time code
« on: November 02, 2011, 02:43:52 AM »
Hi
Just like to know if anyone has ever changed the A810 heads to the 318 type amorphous heads?
I have a set record & repro plus a staggered erase head.
I have made the mods to the head repro amp & the record amp adaptation boards as per Studer instructions.
I am a bit stuck with what to do with the time heads and electronics, can I change the erase head for the required staggered erase head and alter dip switches from 2 track with time code erase to 2 track only.
can the time code electronics read/write PCB & delay PCB just be removed?

any help would be great.

Pages: [1]