Tape Project Forum

Tape Machines => Tape Tech => Topic started by: Detech on March 15, 2017, 09:14:18 AM

Title: Studer A807, A happy ending
Post by: Detech on March 15, 2017, 09:14:18 AM
Dear Ki and Tape Project Forum,

Thanks for help with my 2 dead Studer A807's
Got one of them going, after finding another 3 faults on cpu board.
But the other machine will have to be put away for the moment.
Strange addressing faults . Starts in rew most of the time. Will not go into play, even via RS232 and causes 38Khz noise in repro and sync playback.
Was required for archival capture at 96Khz. So Captures were being rejected.

But I'm very happy all the same.

Best regards,
Des