Tape Project Forum
Tape Machines => Tape Project Machines => Topic started by: porcupunctis on March 17, 2015, 09:46:29 AM
-
Hello, new to the Tape Project but but been around the BH forum for some time.
I'm applying the tape path update to a 1500 and need to replace a meter lamp and establish some direct outs while I have the machine on the bench.
I was considering a set up where the 4T position on the switch would be my direct outs and the 2T would utilize the existing built-in repro. Is this a good approach? What is the easiest way to apply this mod?
Also, what is the easiest way to get to the meters?
Thanks in advance for any help.
-
Why not wire from the headblock so both ¼ & ½ track heads use your external tape head amp? Also the Tape Project tapes are ½ track.