Check out the new Tape Project website at, now with online ordering. Inventory is updated every week, so stop by often to see what we have in stock.

Author Topic: Canadian Studer Service Tech  (Read 9624 times)

Offline classicrecordings

  • Full Member
  • ***
  • Posts: 81
    • View Profile
    • Classic Recordings
Canadian Studer Service Tech
« on: May 17, 2007, 11:22:43 AM »
I have not used his services at this time, but I have spoken to Roger several times and he has told me that he is the authorized Studer tape machine technician for Canada. I hope this is a bit of help for anyone with Studer tape machines in Canada.

Roger Ginsley
Tekx Electronics
2009 Bushmill Street
Pickering, Ontario
L1X 1C8
[email protected]

No website at this time.

David Stangret
HK Citation 1 Pre-amp, Thorens TD-124, Ortofon 309S arm, SPU cartridges, mono block tube amps, Ars Acoustica LaDiva speakers, and I'm still trying to decide what machine to go with.

Offline rhopkins

  • Jr. Member
  • **
  • Posts: 7
    • View Profile
Re: Canadian Studer Service Tech
« Reply #1 on: May 18, 2007, 05:12:17 PM »
Roger has serviced my Studer A810 and is currently rebuilding an A820 for me.  He is a really great guy and knows his way inside and out of the Studer machines, as well as consoles and other professional electronics.  He has all the test gear to tell you exactly how the machine is performing and is capable of repairing just about anything.  I would highly recommend him for any work on Studer decks.
Rick Hopkins