Can you believe it? Tape Project is ten years old! Thanks to everyone who has supported us in introducing studio quality tape reproduction to the audiophile community!

Author Topic: What causes the warbled sound on tape? (reel to reel)  (Read 4181 times)

Offline checkin

  • Newbie
  • *
  • Posts: 3
    • View Profile
What causes the warbled sound on tape? (reel to reel)
« on: November 29, 2014, 01:12:07 AM »
There is a warbling sound of the vocalists on the tape, sounds like they are under water, or on a bad cell phone connection, wavy sound, I cleaned the head & demagnitized it, could it be the pinch roller?

Offline ironbut

  • Global Moderator
  • leader in spreading disinformation
  • *****
  • Posts: 2503
  • rs1500>repro amp#1
    • View Profile
Re: What causes the warbled sound on tape? (reel to reel)
« Reply #1 on: November 29, 2014, 03:00:26 PM »
Hey checkin (btw, we use our real names here, please read forum rules),

The first thing I'd check would be the tape.
If you don't have access to a machine that's known to be running correctly, try some other tapes.


A tape machine's primary duty is to move the tape across the heads uniformly at the stated speed. So, almost all the mechanical workings of the machine are suspect when this isn't happening.
To make a guess over the internet about what may be happening with your machine (if it isn't the tape) we'd need to know the model of the machine and it's background.

My wild ass guess is that the tape you're listening to is curled.
Old tapes (particularly acetate backed) can become deformed if they aren't stored correctly.
One way to check if a tape is curled is to lay a foot or so on a clean flat surface. The tape should lay flat. If the edges are wavy the tape is curled.
steve koto
 Sony scd 777es(R. Kern mods)> Vpi Aires>Dynavector XX-2mkll>Bent mu>CAT ultimate>CJ premeir 140>Magnepan 1.6qr(Jensen xover)Headphone Eddie Current Zana Deux>AT ad2000,HD800 ,Metric Halo ULN-2 (battery powered),
 HE Audio Jades

Offline stellavox

  • Full Member
  • ***
  • Posts: 234
    • View Profile
Re: What causes the warbled sound on tape? (reel to reel)
« Reply #2 on: December 01, 2014, 09:12:14 AM »
You might try cleaning the pinch roller.  How old / long since you used the deck?  Roller could have hardened up or not be making enough contact / pressure with the capstan.  Or is the supply reel binding up and causing a "back pressure" on the tape?

Charles