TP-028, Nat Adderley's Work Song is now available

Author Topic: Otari MX-5050 BIII making all the right sounds, but...  (Read 4981 times)

Offline Turtle

  • Newbie
  • *
  • Posts: 1
    • View Profile
Otari MX-5050 BIII making all the right sounds, but...
« on: February 29, 2016, 06:23:03 PM »
I recently acquired a mint-condition Otari MX-5050 BIII with manual from a local broadcast company. Upon getting it home and firing it up I got nothing but the proper sounds from relays, solenoids, but my left and right reels were motionless(my capstan was spinning).
I opened her up and she was clean as a whistle. All fuses intact. I pushed in the solenoid on one of the braking systems and with my other hand tried to turn the reel table. Pretty much unmovable without significant force. I noticed both direct drive motors were warm, almost NOT noticeable warm, but warm nonetheless...hhhmmm. I noticed the set screws on the motor armatures...hhhmmm.
Loosened the two screws, pulled the reel table forward about 1/8",tightened it and with one hand again holding the brake solenoid the reel table spun exactly as it should. Made the adjustment on the other table and it was like magic. All functions worked as they should.
I deduced that someone laid her on her face and with her 'Rubenesque' weight pushed the tables in.
This is my first Otari and it is absolutely a cut above my RT-909. It is so darn smooth!
Steven Dunn

Offline Listens2tubes

  • Sr. Member
  • ****
  • Posts: 284
  • Reel Analog
    • View Profile
    • Listens2tubes
Re: Otari MX-5050 BIII making all the right sounds, but...
« Reply #1 on: February 29, 2016, 08:25:16 PM »
You have a superior 5050 there. The BIII is a great sounding machine.
Neal - Ampex Fineline F-44, 3 - Otari MX5050BII-2, Revox A77 Mk II , Teac A 4010s, 4070, Sony TC102A, Magnecord 1020, Systemdek IIX/Dynavector Karat 17D2MKII, CEC CD3300 CDP, K Works NanoMax DAC, Van Alsine Transcendence Eight+ tube preamp, Dynaco MkIV amp pair, Paradigm Reference Studio 100 v1