Tape Project Forum

General Category => General Discussion => Topic started by: uraldurusu on November 01, 2009, 09:46:16 AM

Title: Technics RS1500US sidewood panels
Post by: uraldurusu on November 01, 2009, 09:46:16 AM

Hello, I need the original dimensions of the Technics RS1500US sidewood panels. I have the owners and service manuals but there are no drawing for the panels. Thank you for your help.

Regards.

Ural Durusu

Title: Re: Technics RS1500US sidewood panels
Post by: ironbut on November 03, 2009, 05:55:00 PM

Hey Ural,

Sorry for the delay but I totally forgot (I was looking at the tape measure next to my machine and wondering why I'd taken it out?!

The dimensions are;

7 3/8" wide
1 3/16" thick
16 13/16" long

The positioning on the machine has the back flush with the metal top cover.
The top of the side panel is 3mm higher than the top of the front panel.

Title: Re: Technics RS1500US sidewood panels
Post by: uraldurusu on November 04, 2009, 04:16:14 AM

Thank you for the information. Thank you, Thank you.

Regards

Ural