Tape Project Forum

Tape Machines => Tape Tech => Topic started by: Brian C. on December 31, 2009, 06:32:45 AM

Title: Reel screws and barrel nuts
Post by: Brian C. on December 31, 2009, 06:32:45 AM

I have a friend who has 200 flanges and 100 hubs but no screws and nuts to assemble them. Anyone know an off-the-shelf source?
Thanks.

Brian.

Title: Re: Reel screws and barrel nuts
Post by: steveidosound on December 31, 2009, 09:26:33 AM

Quote from: Brian C. on December 31, 2009, 06:32:45 AM

I have a friend who has 200 flanges and 100 hubs but no screws and nuts to assemble them. Anyone know an off-the-shelf source?
Thanks.

Brian.

This might be what you are looking for...

http://usrecordingmedia-store.stores.yahoo.net/hasetfor1mer.html

Title: Re: Reel screws and barrel nuts
Post by: High and Outside on December 31, 2009, 09:46:27 AM

Yep, that's where we get 'em. We don't buy sets of 12, we buy in bulk, so your friend might want to inquire about that. If he needs 100 it should be cheaper than 12-packs.

Title: Re: Reel screws and barrel nuts
Post by: Brian C. on December 31, 2009, 11:36:07 AM

Thanks Steve and Paul, I'll pass that link on to him.

Brian.