Tape Project Forum

Tape Machines => Tape Tech => Topic started by: knasty on May 08, 2010, 03:48:28 PM

Title: A810 Parallel Controller
Post by: knasty on May 08, 2010, 03:48:28 PM

Hi,
First post.
I have been offered a Studer Parallel Controller, P/N 1.328.250.
Does anyone know if this remote will work with my A810?
The plug uses screw hold downs instead of the spring clips that
are on the machine.
Thanks, Rob

Title: Re: A810 Parallel Controller
Post by: Ki Choi on May 09, 2010, 07:07:51 PM

Hi Rob:

I am not familiar with the part number you had mentioned.  The last one Studer offered was 1.328.201.81.

You won't hurt the A810 to try it though...

Ki