Tape Project Forum

Tape Machines => Tape Tech => Topic started by: Gkar on November 06, 2010, 08:45:27 AM

Title: Otari switches cleaning
Post by: Gkar on November 06, 2010, 08:45:27 AM

any suggestions on cleaning the dirty contact in the push button switches?  Mine are noisy, and, unlike the pots, I don't see a place to spray in the deoxit, thanks!

Title: Re: Otari switches cleaning
Post by: GLouie on November 18, 2010, 10:30:05 PM

MTR-10? I recall taking off the entire pushswitch frame with switches to be able to spray into the moving part of the switch, then giving a few hours sitting over a rag to drain.

I also changed the meter lamps to LEDs while I was there.