Tape Project Forum

Tape Machines => Reel to Reel Tape Machines => Topic started by: Wereldomroep on February 29, 2016, 11:09:32 PM

Title: Lyrec part
Post by: Wereldomroep on February 29, 2016, 11:09:32 PM

Hi,

I'm not sure of the is the right place. But I'm looking for a Lyrec PTR-1 part. Can someone message me? I have a picture I can email as I don't know what it's exactly called.

Regs,
Keith

Title: Re: Lyrec part
Post by: ironbut on March 01, 2016, 01:32:17 PM

There is a Lyrec group over on Yahoo.
You should join them and ask over there.
I believe that the group's founder has access to lots of spares.

https://groups.yahoo.com/neo/groups/Lyrec/info

Title: Re: Lyrec part
Post by: Wereldomroep on March 01, 2016, 08:31:09 PM

I found them a while ago. But I suspect the group is dead. The most recent conversation I saw was October 2015.

Title: Re: Lyrec part
Post by: Ki Choi on April 04, 2016, 01:16:41 PM

"I'm not dead!"

What are you looking for?

Ki

Title: Re: Lyrec part
Post by: ironbut on April 06, 2016, 12:23:05 PM

Hi Ki!
Been a while.
I subscribe to the Lyrc group and saw a conversation between Keith (Wereldomroep) and Harold who runs the group.
Last time I saw an email, it looked like Harold provided Keith with the part he needed (reel table hold down).

So, even though some of these groups don't have a ton of activity (you should see the 3M Tape Machines group if you think that the Lyrc is deadsville) give them a try. It can't hurt!

Title: Re: Lyrec part
Post by: Ki Choi on April 07, 2016, 09:28:24 AM

Hi Steve:

I did see the conversation and do talk to Harold once in awhile. Glad he got the part.

Thanks,
Ki