Tape Project Forum

Tape Machines => Tape Tech => Topic started by: drmassaro on April 17, 2008, 09:01:10 PM

Title: Speakers and PreRecorded Tapes
Post by: drmassaro on April 17, 2008, 09:01:10 PM
Hello,

I have been purchasing prerecorded tapes off eBay lately and have found that some tapes play quieter than others.   My deck is a Technics RS-1520.  Some play with a very audible hiss in the background; others play fairly quiet.  I have tried demagnetizing the head and tape path with the Han-D-Mag unit and not much has changed.  What would cause some factory recorded tapes to play quieter than others?  What effect would storing tapes near speakers cause and how far should tapes be kept from the speaker magnet?  My speakers are Klipsch La Scala IIs and I want to be sure I keep my tapes far enough away so as not to degrade my tapes.  Can someone tell me how to store my tapes so that the end of the tape is kept tightly wrapped around the reel?  Lots of questions I know, but I am new to this hobby. 

Thank you,  David Massaro
Title: Re: Speakers and PreRecorded Tapes
Post by: ironbut on April 17, 2008, 09:33:22 PM
Hey David, prerecorded tapes, just like records, will have varying amounts of tape hiss depending on 1) the master tape it was recorded from 2) the equipment it was recorded on 3) the type of tape it is recorded onto. Depending on the era the original recording was made (and other factors such as tape speed and width) the master could be the origin of the loudest hiss. Tape formulas and production techniques have come a long way as has the record and playback equipment used on the master tape. Some of my older tapes were manufactured in the late 50's-early 60's. If you consider that the first US magnetic tape machines were made as upgrades of the Magnetophon recorders confiscated from the Nazi's at the end of WW2 it's a wonder that they even existed that early.
I don't think that the fault is with your 1520. It's the tapes themselves. The signal to noise ratio should be constant. Another thing that may help a tad, is there is a selector for tape eq. Try the different settings. For me, the earlier tapes were made to a pretty high standard. They may have more tape hiss, but they generally sound better.
Regarding your other questions, we all started at some point so don't worry about asking questions. There is however, a sticky posted at the top of the General Forum. In it you'll find tons of important info regarding tapes and machines. If you check out the US Recording Media link there (under the information heading) it will take you to their "tips and faq's" page. It's really excellent and required reading if you value your tapes. Of course, they want you to buy all your supplies there too and since they're one of the only places for some of this stuff, I highly recommend them.