TP-028, Nat Adderley's Work Song is now available

« previous next »
Pages: [1]   Go Down

Author Topic: Otari MX5050BII Bottlehead mod  (Read 4076 times)

Offline Listens2tubes

  • Sr. Member
  • ****
  • Posts: 284
  • Reel Analog
    • View Profile
    • Listens2tubes
Otari MX5050BII Bottlehead mod
« on: September 12, 2011, 07:59:07 PM »
In this thread http://www.tapeproject.com/smf/index.php?topic=553.0 does this mod keep the meters in play? Meaning are the meters accessing the signal from the board before terminal blocks 9, 13 or 14? I am not versed in reading schematics. If not does the mod offered eleiminate the meters? If so why not take the head connection off the head block connector?
Logged
Neal - Ampex Fineline F-44, 3 - Otari MX5050BII-2, Revox A77 Mk II , Teac A 4010s, 4070, Sony TC102A, Magnecord 1020, Systemdek IIX/Dynavector Karat 17D2MKII, CEC CD3300 CDP, K Works NanoMax DAC, Van Alsine Transcendence Eight+ tube preamp, Dynaco MkIV amp pair, Paradigm Reference Studio 100 v1

Offline docb

  • Administrator
  • leader in spreading disinformation
  • *****
  • Posts: 1345
    • View Profile
    • Bottlehead Corp.
Re: Otari MX5050BII Bottlehead mod
« Reply #1 on: September 20, 2011, 04:39:38 PM »
The mod completely bypasses the internal playback electronics and hence any internal metering. I would not advise trying to meter the output of the Seduction or Eros tape head preamp without installing a buffer between the preamp and the meters.
Logged
Dan "Doc B." Schmalle
President for Life, Bottlehead Corp.
Managing Director - retired, The Tape Project
Pages: [1]   Go Up
« previous next »